5 bi-directional RS232
inputs/outputs for computer, modem, remote sign board, character generator
6 Audio inputs on
standard models. All audio inputs and outputs are transformer isolated from
encoder-decoder board.
Automatic interruption of
stereo program lines when pre-selected header code is received for insertion of alert message on transmitter. No
external relay panel is required.
2 minutes of digital
audio storage (5 kHz)
5 programmable relays to
supply contact closures to handshake with automation equipment or signal other
equipment.
25 pin parallel printer
port for external printer to keep E.A.S. log.
Alert is displayed on a
4 line 40 character back lighted LCD display for rapid interpretation of alert
message. Alert message can also be scrolled on a remote sign board, a computer
screen or with a character generator on a video monitor.
20 key keypad to set
input level.
Can have password code
that will be known only by those who will be adjusting the equipment.
Automatic reset of
decoder after 2 minutes.
The stored audio message
can be routed to the speaker for review so that the urgency of the message can
be gauged
Will operate over audio
input levels from 0.14 V to 2 V R.M.S.
Diagnostic information
can be printed out on a printer if unit is malfunctioning and can be faxed to
us for analysis.
Quality 2 1/2 inch 8 ohm
front panel QUAM speakers for clear audio.
Non-volatile memory and
non-volatile voice storage.
4 layer board with all
signal traces on top and bottom and all IC's mounted in sockets for ease of
repair.
Unit has a CMOS EPROM 32
PIN 1MB for future changes.
Units are programmed
for your location at no charge.
EAS Decoder can be easily and affordably upgraded to an EAS encoder-decoder
(EnDec) unit if your station expands operationby replacing a socketed EPROM
